HVAC repair is best done in the summer months when you do not require the use of your furnace. There are some minor preventative forms of maintenance that you can do yourself.
One of the best times of the year to tackle HVAC repair and related maintenance is in the summer months. If you have a furnace in your home then it is much easier to find an available technician during the summer months than it is once it gets cold. Preventative maintenance is much easier to perform in the warmer months because it is not cold outside there is less stress involved in doing the work (both for you and the repair person!). If you look around your community you may find that there are HVAC repair companies that offer deals and specials to have work done during the summertime. If you need preventative maintenance or you are aware that your furnace has a problem then getting it done during the months when you do not need it to keep warm is very smart. As well if you can find a HVAC dealer who has a special promotion on then you can save money at the same time! Know Your Furnace It is a very good idea to have some basic knowledge about your furnace. By doing so you may be able to do some minor preventative maintenance of your own. If you are up for it there are some tasks involving your furnace that you can do yourself. Think of these tips as HVAC repair made simple! You want to know for a certainty that your furnace goes through the cycle that it is supposed to go through. You want to make sure that everything is all right from start-up to shutdown. You can confirm this by taking a close look at the thermostat. But then you also need to be sure that the thermostat is working properly. To do this, first find out if the supply of warm air is reaching every room in your home. Check the grates in all rooms to determine this for yourself. You also need to check the return air in the house to get an idea of the temperature. To do this check the large grate in your home. In most houses it can be found in the hallway but yours might be somewhere else throughout your residence. You are checking these things so that you can be sure that your thermostat is as accurate as it should be. A very simple HVAC repair maintenance tip is to clean and then level the thermostat in your residence. If you have an older thermostat that still works well doing this can keep it in top-notch shape. Many of the older ones contain liquid mercury switches and when you clean and level them it improves the appearance of them. Every furnace door features a safety switch that comes out or in some cases pops right out when the door is taken off. What you want to do is to make sure that the door is as clean as possible and is also unobstructed.
0 Comments
Before you hire a company for heating installation, make sure you have considered important factors, such as the brand of unit you want, permits you will need for the job, and the services you want offered by the installer. Read on for some more details you will need to take into account.
When you are installing a new heater or HVAC system, there are some considerations you need to make about the project even before hiring a company to handle the job. Understanding these aspects of heating installation will help you find the best possible company for the job. Permits Because of the skill needed to install HVAC systems, you may need a permit for the job. When interviewing installers, ask them about the process of obtaining the necessary permits, regardless of if you have a residential or business property. You should choose a company that will handle this part of the heating installation process for you. Brand Take some time to research the different brands on the market, and figure out the one that you want. Each brand has its own unique benefits and drawbacks, and you will likely find one that seems it will work well for you. Once you have a brand in mind, choose an installer that handles that particular brand, and has significant experience in installing those units. Customized Designs Not all properties have cut-and-dried ductwork layouts or fit the cookie cutter ductwork that is available. If you have a unique space, you need to consider looking into customized ductwork for your heating installation. If necessary, choose a company that will create a design specifically for your living space and your preferences that will include custom ductwork. You will only run into complications if you attempt to make a cookie cutter ductwork design fit in a home or business that doesn’t fit the mold the designs were created for. Estimates All installers will give you an estimate on the job, and most will provide this service free of charge. Make sure you ask before you schedule someone to come for an estimate, as you should not be paying for this service. Conversions If you have an oil furnace and need to switch to a gas furnace, a company skilled in heating installation may be able to help. Ask them if they have oil to gas conversion service. Making this switch can save you substantial amounts of money on your utility bills, but you need a company who is skilled in the conversion process to make the switch feasible. Inspections Since you are not likely an expert on HVAC system, you have no way to ensure that the job is done right. Choose a company that includes post-installing inspections in their service. These inspections ensure that your system is running efficiently and safely. This is not something you should leave up to the untrained eye. Energy Efficiency If saving money on your utility bills while helping to protect the environment is important to you, choose a company that installs Energy Star rated furnace systems. Most companies will handle these units, but make sure you specify that you want the energy efficient model. While it may cost more at the outset, you will be saving up to 30 percent on your energy costs for heat by making the switch to an energy efficient model for your heating installation. Most likely the type of heating system you have in your home is a forced air system. This type of system typically will continue to run smoothly with regular maintenance. Without regular maintenance, your furnace can quickly wear out. Maintaining your furnace should cost you a few hundred a year, if not less. This is definitely more favorable than replacing the whole system. Proper maintenance will also keep your furnace operating efficiently. Efficiency is key to saving money on heating bills since heating accounts for about one-third of your energy bill. However, the biggest motivation for having your furnace serviced regularly should be safety. Your home furnace could be a source of a carbon monoxide leak if not properly maintained.
The number one thing you can do to keep your furnace in top working order is to clean it regularly! If you hire someone to do the job they will replace the air filter and clean the filter system, motor, and blower. If you’re cleaning the furnace yourself, you may use a toothbrush to clean the fan blades and any other small areas accumulating dust. Before providing any maintenance on your heater be sure to switch off the power to the appliance by locating a switch. Also, do not forget to shut off the gas to the furnace by locating the knob near the gas line. The gas line is a black pipe that will be connected to the furnace. Turn the knob so that it sits perpendicular to the line to shut it off. It is now safe to open the furnace door, and vacuum in all the crevices your vacuum attachment can reach. Remember to vacuum out the base and around the base of the furnace. Try to remove as much debris and dust as possible. After cleaning the actual unit, make sure the area around the furnace is clean and clear of clutter as well. Never store any flammable liquids nearby or even in your furnace room. Once all debris is removed, remove the old filter and replace it with a new one. The filter on your heater should be replaced monthly during the heating season. Continue to check all fan belts. The fan belts help the furnace blower operate. If you ever find that your furnace is running but heat is not being pushed through the vents, check for broken or worn fan belts. Replace any that look frayed, cracked, or worn. Check the tautness of the belts by pushing on the center of the belt. If the belt gives in more than an inch, the belt needs to be tightened by adjusting the the attachment bracket. If at any point you smell a gas leak, this is a serious problem. Do not continue to work on the furnace but leave your home and report the gas leak to your fire department and gas company. If the unit constantly shuts off whenever the furnace kicks on and trips the circuit, this is due to an electrical problem. In this case, it is necessary to call an electrician or service professional to take a look at the problem. They will know how to safely fix the issue. When all inspections and cleaning has been completed. Replace the anything that you removed such as the access panel. Turn the gas line valve back on and return power to the unit. You may need to relight the pilot light as well. Allow your pilot light to continually run. This will keep condensation at bay even when the furnace is not being used. Finally, use your furnace only as much as you need. In the colder months, dress a little warmer so you can set your thermostat lower. You’d be surprised how much you could save over the season by dropping your thermostat a couple of degrees! Also, try turning down the temperature even more when no one is home to maximize your energy savings. Furnace repair is something that home owners should not do by themselves unless they have enough experience. This part of the house provides heat and warmth for the area when the winter months come in. For the most part of the year, this gadget is not used until autumn comes in and its use may extend up to the middle of February if the weather is not cooperative.
Thermostat The thermostat is what controls the furnace when it comes to the degree of heat that it should produce. This is controlled manually by the people inside the house and can be lowered or increased according to their needs. For a centralized home, the overall temperature in the house may be controlled by just one control unit. When the temperature of the house is not the right one as indicated in the thermostat control, there may be something wrong with the control unit itself or the ducts that deliver the warm air. Furnace repair for a broken thermostat requires that the home owner, at least, have some idea how to fix it. The ducts and the pipes that deliver and retrieve the warm and cold air might also be obstructed. The obstruction may be the cause for the varying degrees of warmth in the house. Openings that provide the warmth can be scanned to check if there is some debris or obstruction close to it but for a more extensive search, professional help may be necessary. Professional furnace repair workers have the necessary equipment, gadgets and tools to fix the unit as well as scan the pipes and ducts to check for obstruction or damages. The unit functions using gas to provide heat for most of the areas in the domicile. If there is no gas, then there is no heat. The pipes that provide gas for the heater can be damage or obstructed which can cause the lack of warmth. While it is easy to check is there is damage to the pipes, leaking gas is dangerous and can explode or cause suffocation if left unattended. Professional furnace repair workers should be called in when this appears to be the case. People with no safety background regarding the handling of gas can cause accidents and fatalities. It is a good idea to learn how to replace a busted fuse. Sometimes, the heater does not work simply because of a blown fuse which can easily be replaced by a fresh one. The fuse box may have instructions regarding the replacement of the fuse but it is a good idea to have the maintenance people show how to replace one. Keeping extra fuses is also beneficial and saves a trip to the hardware store. It is also advisable to save on energy by staying in one area of the domicile as much as possible to conserve energy. Using too much heat can tax the unit and cause it to wear down faster. Furnace repair may also be prevented through regular maintenance and checkups. Which climate control units offer the simplest heating installation, repair, and maintenance methods? Here is a comparison of some of the major types available today.
So which climate control system is the most efficient, easiest to install, and has low installation and heating repair fees? There is no one magic unit that is perfect for each individual or house, but regardless if you are living in a dorm for six months or planning on building your dream home, there is a system that will work best for your needs and expectations. Here is a comparison of the current types of heaters available on the market. Space Heater If you’re on a tight budget or just want to warm a small area, portable heaters, also known as space heaters, are affordable options, ranging from $30 to $100. They come in different sizes, but even the small ones, which no taller than one foot, can pack a punch. They require little maintenance and plug into the wall, so they can be moved room to room as needed. They come in electric, kerosene, and gas varieties. Regardless of type, one big problem is the fire risk. If left unattended or too close to an object, it can start a fire. Space heaters have been responsible for many homes burning down as well as deaths. One should never leave the unit unattended while plugged in, and it should always be stored safely when not in use. Central Heat These types of climate control systems require a boiler or furnace (generally located in an unused area of the home such as a basement) and a series of ducts that carries the heated area throughout the area. Water, electric, and gas are the most commonly found varieties in homes. Installing an entirely new system is expensive and will cost thousands of dollars as the ductwork will need to be customized. Even replacing a boiler will quickly drain your wallet, so heating repair costs need to be budgeted. Overall, however, the performance of a well-maintained and designed central heat system is much better than portable or limited area systems. They will also raise the value of a home. In warmer climates, they are generally unnecessary and are not as common unless combined with an air conditioning unit. Under floor New homes and remodelers are looking towards under floor or radiation heaters for more efficiency. There are hydronic and electric systems which run either heated water or electricity below the surfaces of the home (while the floor is the most common, they can be used in walls and ceilings as well). Instead of warming the air, the heat warms the object that it touches. Installation and heating repair will be expensive, but this disadvantage tends to balance out with high performance and lower energy bills. Homes that utilize radiation heat are often more comfortable and retain a much steadier temperature than air-based systems. Solar Water Heater For those seeking an eco-friendly alternative to gas or electric options, solar power is the way to go. It works by harnessing the sun’s power to do the work for you without resorting to non-renewable resources. Water is collected and then heated by the sun, which is then pumped into the home. It is a popular method in several other countries, and might gain momentum in the US as well. Sometimes you can handle heating repair tasks on your own, but other times your safety is at risk if you do. Learn when you need to hire a professional and when you can safely tackle something as a DIY project.
Heating repair is one form of home improvement that you need to be very careful with. Some aspects of your HVAC system you can easily fix on your own, but others are best left to a professional. As a good rule of thumb, if you are not confident in your ability to fix something, you should not do so. Safe to Do Yourself Some tasks are tasks the average homeowner can handle. For instance, changing the furnace filter in your unit takes just a few minutes and requires no special skill. Simply remove the old filter and replace it with a new one. You can also vacuum or brush the heat exchanger surfaces once per year. Just remember to power off the unit before performing these maintenance tasks. Replacing a thermostat is another task that you might be able to handle on your own, if you are comfortable working with wiring. You may also be able to light the pilot light on your unit if it goes out. Before doing either of these somewhat simple tasks, check with the owner’s manual for your HVAC system, and follow all instructions carefully. Repairs That Need a Professional Sometimes you are safer if you hire a HVAC professional to deal with your heating repair needs. No matter what the situation, if you are unsure about the safest way to do something, call in a pro. However, certain situations almost always require the skill of a trained, licensed contractor. If your furnace stops working, take the time to troubleshoot the situation before calling in a professional. Make sure the thermostat is set properly, and check to see that the pilot light is lit if the model has one. Check the batteries in your thermostat as well. If the furnace has an electrical switch that turns it on and off, make sure it is on. If you have an oil burner, check the oil levels. If none of these situations are the cause of the problem, then you need a professional contractor to look at the unit and determine what is wrong. Attempting to fix other situations in your furnace could put your safety at risk. If you need to add ductwork or adjust the layout of your ductwork in your furnace system, consider at least consulting with a professional. Failure to install ductwork properly could lead to energy loss through leaks in the system. Finally, if you have determined that heating repair is not the answer, but rather you need to install a new furnace or HVAC system, you must use a licensed professional. Doing so ensures that the job is done to code and your family is safe. It also ensures you will not run into problems when it comes time to sell your property. Finding the Right Contractor When you need heating repair services, take the time to find a highly recommended contractor. Ask others who have had heating work done, or look at reviews on third-party websites. These resources will help you find a contractor with excellent skills and a solid reputation. Commercial HVAC installation needs to meet the unique needs and demands of a factory or other industrial building. That means the ability to do high volume climate control and also filter out particulates that are harmful and unpleasant.
The safety and comfort of employees should come first in the design and operation of a factory or other industrial building. A large and important part of that process is in maintaining good air quality and a comfortable temperature for those who are working. There can be unpleasant and noxious fumes that need to be properly ventilated and there can also be incredibly cold or hot rooms depending on the season and location of the business. Because of these concerns it is critical to have someone do high quality HVAC installation that will be appropriate for the application and also offer superior results. The first and perhaps most important role of HVAC installation for industrial applications is the maintenance of air quality and the filtering out of particulates, dust, debris, and pollutants. Over time exposure to these harmful things can cause severely negative reactions including illness and death. Beyond the actual harmful effects it is simply unpleasant. The smell and taste of breathing in contaminated air is not very good when a person has to do it all day every day in their job. Instead by having a large intake that filters the oxygen before cooling or heating it there is no reason that a business owner and his employs have to deal with any of these issues. Another need for industrial HVAC installation is the fact that often factories run many machines and devices. This can cause even a large airy space to quickly become sweltering with the noise and warmth of operation. The solution is having air conditioning units put in that are capable of addressing the needs and demands of this unique type of building. There are devices that offer this ability with no problem but the secret to their continued successful operation is good maintenance. HVAC installation is just the first step in addressing the needs of a factory. Once the system and units are in place frequent upkeep should be done to maintain their correct functioning. That means cleaning and replacing filters and having technicians out periodically to inspect and repair broken or inefficient components. Also, be sure that the technicians who come out inspect the ducts and tubing for leaks or inefficiencies where there may be waste that is contributing to higher costs and less effective heating and cooling. The risks of working in an industrial capacity are high. Instead of suffering and breathing stale and hot oxygen have HVAC installation that is geared toward a factory type building and has both the power and the filtering capacities to fully clean and cool the atmosphere. Workers will be appreciative and the feeling of having lungs is worth the expense and time commitment. As the temperatures outside begin to get cooler, it becomes much easier to keep temperatures inside the home cool. HVAC service is still important during these times because the same parts that kept the home cool are the same parts that will keep the home warm.
Many homeowners can now breathe a sigh of relief knowing that the hot summer months, and the high electricity bills are behind them. However, even in mild climates, the occasional cold snap during the winter can wreak havoc on climate control in the home. Even if your heating, ventilation, and air conditioning (HVAC) system has managed to make it through the summer, HVAC service might be needed from time to time. Some of the most common HVAC service needs can quickly turn into a much bigger problem that could wind up costing the homeowner hundreds of dollars in repairs. For instance, dirty air filters are a simple fix, but ignoring this basic service need will cause the system to have to work extra hard in order to keep the home's climate comfortable. The air filter serves as a tool to keep the air flowing in and out of the system clean. Therefore, homes with smokers or pets might need to have the air filter changed more often, since the particles from smoke and pet hair tends to get caught in the filter much faster. An air filter that is neglected can create air output problems for the HVAC system. If air cannot flow through the home efficiently, the system must work much harder in order to maintain the regulated temperature. This will eventually cause a system breakdown once the other vital parts have become too worn to operate properly. It always helps to pay close attention to how the HVAC system is operating to help pinpoint any potential issues. Some homeowners have noticed that although the system keeps the home comfortable, it may run constantly or never reach the temperature set on the thermostat. These types of issues may seem simple and difficult to notice, but they are indicators of an impeding system breakdown, and you should look for HVAC service immediately. Many homeowners think that if their system can make it through the hot summer months, then there is no need for HVAC service during the fall and winter. Since an HVAC system is adequate enough to keep homes in mild climates warm during the winter, it is important to have the system checked before the first cold snap. All of the parts that were used in the summer to keep the home cool will also be used to keep temperatures warm. Therefore, the coils, condensers, and heat pump should receive a maintenance check to be sure each of these parts is working properly and can withstand cold temperatures, as well as the extremely hot temperatures. Is your home ready for the changes in weather? Get your HVAC system serviced before the weather breaks to keep you from having to deal with any emergency situations.
As the weather changes throughout the year, it is important that you get your HVAC system ready for the changes. It is so easy to assume that you don't have to lift a finger to keep your furnace and air conditioning system in tip-top shape, however, just like with any other mechanical appliance, this part of your home needs to be serviced several times a year. In order to help minimize the amount of money you have to spend on home improvements to make your place more comfortable throughout the year, you can hire an HVAC company to come inspect your home and your ducts. Chances are that if you have been living your home for several years, your ducts need to be cleaned. Don't assume this is something you can do yourself, because without the proper materials and knowledge, you could end up making a very big mess in your home. Any dirt, dust, allergens, and other contaminants that can cause respiratory problems will persist until the air filters have been replaced and the ducts have been cleaned. The same goes for if you are using the air conditioner. That cool air has to travel through the vents in your home in order for your home to cool down when it is too hot. If the system is not kept clean, mold and other harmful contaminants can grow and cause your home to be toxic. Many people are not aware that many of their allergies and respiratory problems occur as the result of not having their HVAC serviced in a timely manner. In addition to having your ducts cleaned on a periodic basis, your furnace needs to be serviced as well. In the winter the temperatures drop to its lowest at night, so that is when your furnace works the hardest to keep your home at a normal and comfortable setting. This is also when most furnaces tend to go out. If you have never experienced what it is like to wake up to a cold house in the middle of the night, you don't want to find out now how shocking and unpleasant that experience can be. Most emergency prices tend to go up in the wintertime so unless you can afford to pay a HVAC company for each emergency service call they may make because your furnace is not being properly cared for, it is best to discover and take of the problem now. If you have your system serviced throughout the year, you don't have to worry about needing any emergency visits during the busy seasons. As you may know, your HVAC system is the number one consumer of energy in your home and accounts for up to 58% of your energy bill! Anything you can do to make your air conditioner more efficient, especially in San Diego, is beneficial to your energy bill and the overall life of your system.
Change the air filter. Once you change it, set an alert on your phone or computer calendar to remind you to change them out every month during the summer. It may seem like a lot of upkeep but it will help extend the life of your HVAC system. Stock up on air filters at the beginning of the summer and store them away for easy access. This way you won’t forget to change it for another month and you’ll save a trip to the store! It will make the process much easier on you. Test the system. If you haven’t already, turn the AC on and turn down the temperature to force the system to turn on. When you hear the system starting to blow air, be sure to place your hand in front of a vent to make sure the air coming through is considerably cool. If any problems arise such as the system not turning on, or warm air coming through the vents, be sure to call an air conditioning repair company to remedy the system right away. The earlier in the season that you can get the repair done, the less likely you will have to pay more during a peak-of-the-season emergency. Check the ducts. You may have a faulty duct system if you experience uneven cooling or sky high energy bills. For some insight on how much you should be spending in relation to your energy consumption, use this Power Usage Calculator. Still not sure if your ducts are working efficiently? Many air conditioning contractors can perform a duct test to find where faulty areas are. If you use a contractor to do a duct test and you have it repaired by a registered contractor, CPS Energy will actually pay 50% of the cost of testing the duct system. There are also Air Flow Performance Rebates up to $2,500 for duct repairs and replacement. If you’re more of the do-it-yourself type, check out When Is It Time to Clean Your Ducts Maintain the outdoor unit. A simple task you can complete on your outdoor unit is to clear any debris immediately around it. Anything that would affect the unit from pulling air into it should be removed. As long as there is a couple feet of clearance around the entire unit, it will continue to perform efficiently. To complete a thorough cleaning and checkup on your unit, call your local air conditioning contractor to perform a cleaning and inspection. Make sure this is done every year to get the most out of your air conditioner and keep it running efficiently. Other Energy Improvement Updates... Install a programmable thermostat. If you don’t have a programmable thermostat, installing one is simple and can save you loads on your energy bill. The benefit to having a programmable thermostat is being able to schedule it to an energy-saving temperature while you aren’t home. For example, when the family leaves for work/school, you can program your thermostat to 78 or 80 degrees. This temperature may be a little warm when everyone is home, but is a great temperature to keep an empty home. Setting it any higher, or completely turning the AC off isn’t always beneficial since it needs to work that much harder to cool the home to a comfortable temperature again. CPS Energy has a residential program that includes a free digital thermostat if you don't want to pay for one and you don't mind waiting a bit. Install attic insulation and an attic fan. Another great energy saver is attic insulation. Attic insulation keeps the hot air in your attic and not in the living spaces of your home. Install an attic fan for an inexpensive way to keep your attic even cooler and therefore keeping your home cooler. Seal up an air leaks to the outside. Close any air leaks by windows or doors with caulk or a weather-stripping material. The more airtight your home is, the less your air conditioner needs to work! Add a UV film to your windows. UV film is a thin plastic that sticks to your windows and can block almost all UV rays as well as a high percentage of solar heat. Not only does this film keep your home cooler when the sun is blazing, but it also protects your furniture, carpets, and wood flooring from UV damage. |
AboutLooking for a local professional HVAC technician? Our experts at HVAC Services San Diego provide a full suite of HVAC services, including HVAC installation, repair & maintenance. Call 858-630-2972 (24/7) for a FREE quote today! Categories |